juzisound micro
juzisound micro

Juzisound Micro

€699.00

New generation of sampler device, again specialized for playing ethno solo sounds. This new device is specially created for use in Eastern European and Balkan regions. Also it is very useful for musicians from Turkey, Greece, Arabs and the Middle East. If you play that kind of music, this device is really the right one for you!

Availability: 1 in stock

Category:

Product description

Whu Sampler MICRO is created?

Total SOLO Sampler MICRO is successor of Sampler 1, but technology is based of Sampler 2. Sampler MICRO is really cost optimised version of Sampler 2. All high cost componnents like aluminium box, large touch screen display, 4 audio outputs and many hardware buttons and LEDs are removed to optimize cost, but sound quality is not touched. Sampler MICRO not have any compromise with sound quality. This is the same like in Sampler 2 + improvement of analog master volume, like in Sampler 1.
Sampler MICRO is created to replace Sampler 1 for uses with synth-keyboards, and to be low cost alternative of Sampler 2. Sampler MICRO is higly recomended too, for use with MIDI accordion systems, when MIDI system is intalled only for right solo part. In this case Sampler MICRO is perfect variant and overal system cost will be more effective.

What Sampler MICRO offers?

2 totally independent Uppers
– Upper 1 and Upper 2 are standard and fully independent. It’s possible for any of them to load any sound in any oscillator mode.

All Oscillator Modes from Sampler 2
– Sampler MICRO has all oscillator modes from Sampler 2, except “Ethno Violine”.

Polyphony of 24 stereo voices
– Sampler MICRO have plyphony of 24 stereo voices exact like Sampler 2.

Stereo Sampling
– Sampler MICRO works with stereo samples too. Supported sample formats are: PCM WAV files, 16bit / 48kHz / Mono or Stereo.

Play sound bank from Sampler 2
– Sampler MICRO play the same bank from Sampler 2, with same limitations.

Sample interpolation is 4 point Hermite
-Best sounding audio interpolation for real time use.

2 Insert Effects
– Every upper have one insert effect.

2 Master Effects
– Master delay and Master Reverb block.

Combined MIDI Connector
– MIDI connector is only one, but this connector fave 3 combined function, available in the same time: MIDI Input, MIDI Output and Power out for power accordeon MIDI system. For MIDI out and Accordion Power function, need optional special cables.

Analog Master Volume
– Master volume is realized in analog part, exact like in Sampler 1. No sound quality degradation, when master volume is very low.

OLED Display
– Sampler MICRO have very contrast OLED dysplay, sunlight visible. Displa resolution 128×64 pixels.

Protected SD card connector
– SD Card is fuuly prodected from mechanical damages, becouse all card is inside sampler.

4 onboard buttons
– Sampler MICRO have only 4 onboard buttons, but with this buttons is available all function of device.

USB host connector for external USB bupad keyboard
– External USB nupad keyboard is included, for fast and easy moving in menu.

Terca and Scala controls
– All terca and Scala functions from Sampler 2 are available.

Sound GROUP Mode
– Sampler MICRO has sound groups like Guitars, Pianos, Strings and more, for easy sound finding.

Integrated breath controller converter
– Like Sampler 1 and Sampler 2, Sampler MICRO have internal breath controller converter with hardware GAIN and OFFSET. Possible to control external MIDI device too.

Weight 1 kg
Dimensions 10 × 10 × 5 cm
juzisound micro

CPU:

1 x ARM CPU STM32H743VIT6
Frequency 480.000 MHz

Digital Audio Processing:

32 bit / float

Sample Rate:

48 kHz

Wave memory:

Unlimited – depending on the size of SD card used

SD Card slot:

SD Cards 2.7–3.6V Push/Pull

Supported SD cards:

All models 16MB – 256GB

SD Card frequency:

50 MHz

Audio file format:

WAV / 48000Hz / 16 bit / Mono or Stereo

Sampling method:

Full Length – entire length of the sample Not use Loop Point Single WAV file for each note

Multisamples:

10 000 multisamples in a bank 20 multisamples for every program

Multisample files:

128 WAV files, single file for each note

Maximum polyphony:

Total 48 voices*
*24 mono or 24 stereo (equal to 48 mono) voices available from SD card, and shared between Upper 1 and Upper 2.

Oscillator mode:

Normal POLY, Bass MODE, Mono RETRIG, Mono LEGATO, Mono+PRT CZ, Mono+PRT DX, Ac Bouzouki, LPC Gibson, Ethno Bouzouki*, Mono+PRT KG, MonoPRT JS1, MonoPRT JS2, StradivariV, Kempa GROUP*, Strad Vio 2, JS TenorSax, JS Alt Sax, JS Clarinet, JS Bouzouki, JS Turkish Oud*.
* new for sampler 2

Sounds:

10 000 sounds for one bank

Presets / Combinations:

10 000 preset/combinations for one bank

Scale / comma:

Resolution +/- 99 cents per semitone One USER scale for each preset, plus 6 separate programmable global scales with option for instant recall at any time. There is ability to control the scales via MIDI directly from a synthesizer (with Sysex messages).

Terca:

13 presets for terca plus modes for scanning tercas. Ability for terca with a timbre, that differs from the basic timbre. There is a possibility to control the tercas via MIDI directly from a synthesizer (with CC12 and CC13).

Effects:

1 Insert effects for every upper + 3 band EQ per upper + 2 master effects – Delay and Reverb.

DAC:

Texas Instruments PCM1791A Sampling frequency 48 kHz Audio data 32bit

Operational amplifiers:

NE5532P

Master volume:

Analog controlled, ALPS potentiometer

Audio outs:

2 separate mono 1/4 TRS connectors,
mono, unbalanced, rear panel
Impedance 140 Ω
Signal-to-noise ratio 112 dB
Stereo crosstalk < -80 dBu/1 kHz
Maximum output level +20 dBu

MIDI interface:

1 x Standard 5-pin DIN connector.
This connector share both MIDI Input and MIDI Output functions. To use both of them, need to purchase special Y type MIDI cable.

USB interface:

1 x USB HOST connectors
Accept classes: USB Keyboard, Mass Storage Device or MIDI devices

Remap of note velocity:

Yes, using 16 different velocity curves, plus the limitation and mixing of 2 curves.

MIDI Analyzer:

Yes, shows the 6 most recent MIDI events

Sysex Analyzer:

Yes, shows up to 128 Sysex bytes

Input for Analog Controller:

3.5mm stereo jack Manual configuration of the power pins with hardware switch. Power +5V Direct current (DC) Short circuit protection Input signal level from 0 to +5V Hardware controlled Pull Up resistor 2.2 kOhm Hardware analog amplifier with software-controlled GAIN and OFFSET

MIDI converter from Analog IN:

Ability to generate up to 3 different MIDI messages simultaneously, each with independent parameters. Send up to 3 different MIDI channels simultaneously. Messages are sent via MIDI OUT.

Ability to power external devices:

(Through the EXTENSION port)
+5V / 300 mA
+3.3V / 100 mA

Display:

128 x 64 pixels monohrome OLED display

LED Indicators:

MIDI In, Audio CLIP

Package contents:

Sampler, 256GB SD Card, AC power adapter, MIDI cable, Warranty Card, Quick Start

Optional items (sold separately):

Breath Controller (Analog Version), second MIDI cable, Y MIDI cable

Operating conditions:

Temperature from 0° to 40° C
Humidity < 90 %

Cooling:

Active cooling with turbine FAN
2 Speeds automatic control

Power Supply Adapter:

Input: AC / 230 Volts +/-10% / 50-60Hz
Output: 15V AC, 0.400A

Build-in fuse:

400mA

Power consumption:

<6 W

Warranty:

Standard Juzisound LIFE TIME warranty!* More…

Dimensions:

85 x 80 x 41 mm

Weight:

0.180 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.